Cable Matters USB-C to 8K HDMI and DisplayPort Adapter (201070) – Firmware Update to Fix Compatibility and Performance Issues

Cable Matters released a firmware update for its USB-C Dual Monitor Adapter. This update resolves several compatibility and performance issues. Follow the instructions below to update the device firmware.

Applies to

This firmware update applies to the following Cable Matters products:

Resolved Issues

This firmware update resolves the following issues:

Firmware Update Instructions

1) Connect the adapter to a USB-C port on a computer or laptop. Then connect a display to the adapter's HDMI or DisplayPort port. If you are using a laptop, connect an AC adapter to the laptop. 

2) Click here to download the firmware update tool. 

3) Unzip the firmware update tool and launch the “VmmDPTool.exe” program. If a prompt asks to run the program as an Administrator, click yes.

4) In the Debug tab, click the “FW version” button. The “Status” textbox should populate with information about the adapter. Check that the “Firmware version” field is less than  6.05.120.”

5) Click the “FLASH” tab, then click the “Load to FLASH” button. In the file open dialog, select the firmware file and click “Open.” Your firmware file might be different than the file in the picture below. 

6) If a dialog box appears stating the Product ID did not match, click Yes to proceed with the firmware update.

7) Wait for the firmware update process to finish. When the firmware update process finishes, disconnect and reconnect the adapter from the computer. Verify the firmware update by clicking the “FW version” button and checking that the new firmware version is installed.

Firmware Update Troubleshooting

Version History



Article ID: 152
Last updated: 18 Aug, 2022
Revision: 7
HDMI -> Adapters -> Cable Matters USB-C to 8K HDMI and DisplayPort Adapter (201070) – Firmware Update to Fix Compatibility and Performance Issues
https://kb.cablematters.com/index.php?View=entry&EntryID=152