Cable Matters KVM and USB Switch - Remote Pairing Instructions (201352, 201075, 202060, 202070, 202071, 201085)

Cable Matters KVM and USB Switches come with an individually paired remote. Please follow the instructions below to pair the remote. 

Applies to

• Cable Matters 20Gbps USB C Switch for 2 Computers (201352)
• 14-in-1 Dual 4K 60Hz USB C KVM Switch Dock (201075)
• 4-Port USB 3.0 Switch with Remote Control (202060)
• USB 3.0 KVM Switch DisplayPort 1.4 for 2 Computers (202070)
• USB 3.0 KVM Switch for 2 Computers with HDMI and 3 x USB 3.0 Ports (202071)
• Dual 4K 60Hz USB C KVM Switch 2 Computers (201085)

Remote Pairing Instructions

1. Connect the Switch to your computer
2. Power the Switch (optional)
3. Pair the Remote
   • Remove the insulating tab from the end of the battery.
   • Press and hold the Pair button on the remote for 5 seconds.
   • If you have multiple switches in the same room, unplug the others before pairing.
4. Switch Between Computers

Troubleshooting

Try holding the pair button longer if pairing fails. Check the remote's battery if it's unresponsive.

To turn the remote control feature on or off:

• Model 202060: Press and hold the #1 and #3 buttons on the switch for 5 seconds.
• Models 201085 / 202070 / 202071 / 201075: Press and hold the #1 and #2 buttons on the switch for 5 seconds.
• Rapid blinking LEDs indicate the remote control function is off.
• Slow blinking LEDs indicate the remote control function is on.